Item Description Shipping Info Ordering Info Photos

9004 HID Conversion Kit

9004 HID Conversion Kit
Secure Shopping
 $195 - 4,300 Kelvin HI/LOW Kit
 $195 - 6,000 Kelvin HI/LOW Kit
 $195 - 8,000 Kelvin HI/LOW Kit
 $155 - 4,300 Kelvin Low ONLY
 $155 - 6,000 Kelvin Low ONLY
 $155 - 8,000 Kelvin Low ONLY
Secure Shopping
Item Description

HID Kit, 9004 High Intensity Discharge Kit Hi/Low

9004 Low only HID Kit

The low/hi kit has an internal switching mechanism that will use the same HID bulb for both low and high applications. The low only kits are just that - low beam only. The high beam will no longer be functional.

  High Intensity Discharge (HID) versus Halogen  
  HID Halogen
Light Source Arc Discharge Filament
Color Temp 4,300k-12,000k 3,300k
Lumens 3,200 Lumens 800 Lumens
Power Consumption 35 Watts 55 Watts
Life Span 3,200 Hours 300 Hours



Kelvin comparison for HID Kits

Color Temperature is a measurement in Degrees Kelvin (K) that indicates the hue of light source. There is a misconception that color temperature is a rating of the brightness of the HID bulb. The truth is that the higher the color temperature, the less light output from the HID bulb.
HID Kit - High Intensity Discharge
However, all HID light is much brighter than Halogen, even if it is a 35W 12000K HID bulb, the light output still maintain well over 2700lm; which is still 300% brighter than 55W Halogen with 700lm.


The HID Kit includes the following:
  •  
  • Two ballasts
  •  
  • Two Philips HID bulbs
  •  
  • Wiring harness
  •  
  • User manual
  •  
  • Warranty card


    What HID Kit do I need for my vehicle? Click Here to see the Sylvania headlight replacement guide

    HID Kit - High Intensity Discharge bulb replacement kit
    HID Kit - Click on the image to enlarge



    HID Instruction Manual Page 1 in PDF Format
    HID Instruction Manual Page 2 in PDF Format
    HID Instruction Manual Page 3 in PDF Format
    HID Instruction Manual Page 4 in PDF Format


  •  
  • This HID system generates approximately 23,000 volts. Pay extreme attention while installing or removing this unit. Prior to installation, please check if the stabilizer, igniter and the HID bulbs are in good condition. In case of damaged wires, damaged/defective ballasts, damaged terminals and exposure of any wires, please return the kit to us.
  •  
  • Do not look or stare into the HID beam or any part of the HID light. Looking into an HID light may cause eye soreness and potential permanent eye damage.
  •  
  • Do not switch on the headlights during the installation process. Do not touch the red connector on the stabilizer’s power cable or you may be subjected to electrical shock.
  •  
  • Do not change or modify any components, wiring or any part of this kit. Doing so may result in damage to the kit and possible electrical damage to your vehicle.
  •  
  • The HID bulb can get very hot. Avoid all skin contact when the headlights are on. Allow the HID bulbs to cool before installing or removing the bulbs.
  •  
  • Verify and adjust the direction of the beam axis. If necessary, lower the angle of the HID beam to avoid glare that may be projected into the oncoming traffic.

    Text your questions to: (714) 271-3829
    MyTightRide, Inc. • 2211 E. Winston, Unit K, Anaheim, CA 92806 • (714) 956-3801 • Info@MyTightRide.com



    Payment by Visa, Mastercard, American Express, Discover Card, PayPal and Western Union


    MyTightRide Blog #1 • MyTightRide Blog #2 • MyTightRide.com's Home Page • MyTightRide.com's Site Map
    • MyTightRide.com's Associates


    Tail Light Replacement Lenses
    • Projector Headlight Lenses • Billet Grill & Mesh Grill • HID Kits • Running Boards/Side Steps • Fender Flares • Wings & Spoilers
    Site Map
    Shop By CategoryMy Tight Ride Facebook My Tight Ride Twitter
    Bookmark and Share